Air Compressor Oil VDL 32#
Product Description
Air compressor oil VDL is a high-quality air compressor oil specially designed for rotary slide and screw air compressors. The product uses selected additives to provide good protection for the compressor and has an oil change cycle of up to 3,000 hours.
• Packaging: 18L, 200L
• Customized packaging available upon request
Specifications and Approvals
- • DIN 51506: VDL
- • ISO 6743-3: DAH
Performance Benefits
-
• Long oil lifesave maintenance costs: oil change interval can reach 3000 hours even under the maximum exhaust temperature of 100℃ operating conditions.
-
• Excellent wear protectionexcellent anti-wear protection properties effectively ensure protection of the internal metal surface of the compressor and reduce corrosion and wear.
-
• Protect system efficiency:excellent air release and anti-foam properties ensure reliable start and stability of continuously compressed gas. Air compressor oil VDL allows rapid air release without excessive foam.
Applications
Air Compressor Oil VDL 32# is recommended for rotary sliding vane air compressors.
Get detailed product specifications and have our technical experts confirm whether this formulation is suitable for your equipment.
ACCESS PRODUCT DATA
Typical Test Data
Test Item | Result | Method |
Density (20℃), g/cm³ | 0.850 | ASTM D4052 |
Kinematic Viscosity (100℃), mm²/s | 5.4 | ASTM D445 |
Kinematic Viscosity (40℃), mm²/s | 32.1 | ASTM D445 |
Viscosity Index | 102 | ASTM D2270 |
Pour Point, ℃ | -33 | ASTM D97 |
Flash Point (COC), ℃ | 232 | ASTM D92 |
Water Separability, minutes | 15 | ASTM D1401 |
Health, Safety & Environment
The product is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Storage
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to direct sunlight or freezing conditions.
The indicated properties are typical of those obtained with normal production tolerance and do not constitute a specification. All the information contained in this document is considered accurate as of date of printing, and no warranty or representation, expressed or implied is made as to the accuracy of the data and information in this publication. The information contained herein is subject to change without notice.