Full Synthetic Gasoline Engine Oil SN/A3B4 10W-40
Product Description
Full synthetic gasoline engine oil SN/A3B4 provides excellent cleaning and protection properties. The use of organic molybdenum anti-friction technology improves the oil wear resistance significantly. Excellent low temperature fluidity delivers more suitable for frequent start-stop working conditions, lower friction, more fuel saving and environmental protection.
• Packaging: 18L, 200L
• Customized packaging available upon request
Specifications and Approvals
- • API SN/CF
- • ACEA A3/B4
- • MB 229.3
- • VW 505 00/502 00
- • Renault 0700/0710
Performance Benefits
-
• Excellent anti-wear protectionProtects the engine against wear and extends engine life even under the most demanding operating conditions.
-
• Active cleanlinessRemoves residual oil from the engine to keep the engine clean.
-
• Excellent low temperature performanceBetter oil fluidity enables fast engine start.
-
• Support a variety of fuelIt can be used in gasoline, diesel and natural gas engines, as well as biodiesel and gasoline/ethanol blends.
-
• Low Speed Pre-ignition Protection (LSPI)Reduces the adverse effects of high power turbocharged direct injection engines on low speed pre-ignition (LSPI).
Applications
Full Synthetic Gasoline Engine Oil SN/A3B4 10W-40 is suitable for all kinds of city cars with new technology engines such as multi-valve, in-cylinder direct injection (GDI, FSI, SIDI, etc.), turbo charging (TSI, TFSI), etc. It can be used in gasoline, diesel and natural gas engines, as well as biodiesel and gasoline/ethanol blends.
Get detailed product specifications and have our technical experts confirm whether this formulation is suitable for your equipment.
ACCESS PRODUCT DATA
Typical Test Data
Test Item | Result | Method |
Density (20℃), g/cm³ | 0.86 | ASTM D4052 |
Kinematic Viscosity (100℃), mm²/s | 14.3 | ASTM D445 |
Kinematic Viscosity (40℃), mm²/s | 99.4 | ASTM D445 |
Viscosity Index | 148 | ASTM D2270 |
Pour Point, ℃ | -39 | ASTM D97 |
Flash Point (COC), ℃ | 234 | ASTM D92 |
Viscosity, Crank (-25℃), mPa | 5650 | ASTM D5293 |
Health, Safety & Environment
The product is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Storage
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to direct sunlight or freezing conditions
The indicated properties are typical of those obtained with normal production tolerance and do not constitute a specification. All the information contained in this document is considered accurate as of date of printing, and no warranty or representation, expressed or implied is made as to the accuracy of the data and information in this publication. The information contained herein is subject to change without notice.