Automatic Transmission Fluid ATF DX-Ⅵ
Описание продукта
Advanced synthetic automatic transmission fluid meets the requirements of General Motors, Ford and a variety of cars and trucks for lower viscosity automatic transmission fluids. The excellent performance of synthetic technology lubricants is designed to meet the needs of many types of vehicles for automatic transmission aftermarket oil. Meets a wide range of requirements for automatic transmissions using low-viscosity automatic transmission fluids in Asian, European and North American models such as GM DEXRON®-VI, Ford MERCON LV and Toyota WS.
• Packaging: 18L, 200L
• Customized packaging available upon request
Specifications and Approvals
- • DEXRON VI/IIIH/IIIG/IID
- • Ford MERCON® LV
- • JASO 1-A-LV
- • Toyota T, T-II, T-III, T-IV
- • Audi G 052 162, G 052 990, G 055 025
- • BMW 7045E (3 Series), BMW 5 Series, LA 2634, LT 71141
- • Mercedes-Benz; MB 236.1, 236.2, 236.3, 236.5, 236.6, 236.7, 236.9, 236.11, 236.81
- • Volvo 4-6 speed
- • VW G 052 162, G 052 990, G 055 025
- • Alisson C-4/TES-389B/295
Performance Benefits
-
• Improves friction characteristicsmakes the automobile transmission system achieve continuous, reliable, smooth and trouble-free operation.
-
• Exceptional oxidation resistanceprevents oil degradation and keep automatic transmission clean. Ensures the performance of the old gearbox and the long working life of most imported gearboxes.
-
• Excellent shear stabilityspecial viscosity index improvers make the viscosity change with temperature smaller which reduces the oil viscosity loss at operating temperature.
-
• Reliable anti-wear protectionextends component life and provides effective gear protection throughout the life cycle of the vehicle.
-
• Low temperature performancethe excellent fluidity can ensure the cold start performance of the vehicle and smooth shifting at low temperatures.
Получите подробные характеристики и консультацию специалистов о применимости данной формуляции для вашего оборудования.
ДОСТУП К ДАННЫМ О ПРОДУКТЕ
Typical Test Data
Test Item | Result | Method |
Density (20℃), g/cm³ | 0.85 | ASTM D4052 |
Kinematic Viscosity (100℃), mm²/s | 6.2 | ASTM D445 |
Kinematic Viscosity (40℃), mm²/s | 30.3 | ASTM D445 |
Viscosity, Crank (-40℃), mPa | 11000 | ISO 9262 |
Viscosity Index | 160 | ASTM D2270 |
Pour Point, ℃ | -45 | ASTM D97 |
Flash Point (COC), ℃ | 200 | ASTM D92 |
Health, Safety & Environment
The product is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Storage
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to direct sunlight or freezing conditions.
The indicated properties are typical of those obtained with normal production tolerance and do not constitute a specification. All the information contained in this document is considered accurate as of date of printing, and no warranty or representation, expressed or implied is made as to the accuracy of the data and information in this publication. The information contained herein is subject to change without notice.