Multifunctional Hydraulic and Transmission Oil N100D
产品说明
Multifunctional Hydraulic and Transmission Oil N100D is formulated with highly refined high-viscosity index base oil, thickened with PMA, and blended with imported multifunctional additives providing anti-wear, antioxidant, anti-rust, anti-corrosion, pour-point depressing, and anti-foam properties. It is specially designed to meet the lubrication requirements of the hydraulic and transmission systems in tractors, construction machinery, and port equipment.
• Packaging: 18L, 200L
• Customized packaging available upon request.
Specifications and Approvals
- • JB-T7282-2016
Performance Benefits
-
• High viscosity index and ultra-low pour pointProvide excellent low-temperature pumpability and cold start performance.
-
• Excellent anti-wear, anti-rust, and anti-corrosion propertiesReduce component wear and extend equipment service life.
-
• Optimized frictional properties eEnsure smooth shifting and enhanced operator comfort.
-
• Outstanding oxidation stabilitySlows lubricant degradation and extends oil drain intervals.
-
• Superior anti-foam performanceMinimizes foam formation and suppresses system micro-vibrations.
-
• Excellent compatibilityExcellent compatibility with rubber seals ensures reliable sealing performance.
Applications
Multifunctional Hydraulic and Transmission Oil N100D is suitable for transmission, hydraulic, and hydrodynamic systems in tractors, agricultural and construction machinery.
获取详细规格参数，并咨询专家该配方对您设备的适用性。
获取产品资料
Typical Test Data
Test Item | Result | Method |
Density (20℃), g/cm³ | 0.865 | ASTM D4052 |
Kinematic Viscosity (100℃), mm²/s | 12.14 | ASTM D445 |
Kinematic Viscosity (40℃), mm²/s | 97.6 | ASTM D445 |
Viscosity Index | 116 | ASTM D2270 |
Pour Point, ℃ | -33 | ASTM D97 |
Flash Point (COC), ℃ | 220 | ASTM D92 |
Health, Safety & Environment
The product is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Storage
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to direct sunlight or freezing conditions.
The indicated properties are typical of those obtained with normal production tolerance and do not constitute a specification. All the information contained in this document is considered accurate as of date of printing, and no warranty or representation, expressed or implied is made as to the accuracy of the data and information in this publication. The information contained herein is subject to change without notice.