Heavy Duty Automatic Transmission Fluid ATF A295
产品说明
Heavy-Duty Automatic Transmission Fluid ATF A295 is a fully synthetic, extended-drain transmission fluid designed for heavy-duty automatic transmissions requiring Allison TES-295 certification. It is also suitable for ZF and Voith heavy-duty transmissions.
• Packaging: 18L, 200L
• Customized packaging available upon request.
Specifications and Approvals
- • Allison TES-295/389/468
- • DEXRON®-IIIG
- • Voith 55.6335
- • MAN 339A
Performance Benefits
-
• Superior Shear Stability for Extended Equipment LifeSpecial viscosity index improvers minimize viscosity changes with temperature fluctuations, reducing viscosity loss at operating temperatures. This ensures stable lubrication and consistent oil film thickness, providing effective protection for gears, bearings, and other mechanical components.
-
• Reliable Anti-Wear Gear ProtectionExtending component life by providing effective gear protection throughout the vehicle's lifecycle.
-
• Oxidation StabilityContaining inhibitors to control oil oxidation and deposit formation, preventing corrosion of iron and other metals. This product improves low- temperature fluidity, suppresses foam formation, and enhances operational efficiency.
-
• Low-Temperature PerformanceExcellent oil fluidity ensures reliable cold-start performance and smooth shifting at low temperatures.
Applications
Heavy Duty Automatic Transmission Oil ATF A295 is specially designed for medium and heavy-duty Allison automatic transmissions that require extended oil drain intervals, particularly those meeting TES-295 certification. It is also suitable for ZF and Voith heavy-duty transmissions, as well as applications requiring DEXRON® IIIH and MERCON® approvals, making it an ideal choice for mixed fleets.
获取详细规格参数，并咨询专家该配方对您设备的适用性。
获取产品资料
Typical Test Data
Test Item | Result | Method |
Density (20℃), g/cm³ | 0.850 | ASTM D4052 |
Kinematic Viscosity (100℃), mm²/s | 7.3 | ASTM D445 |
Kinematic Viscosity (40℃), mm²/s | 36 | ASTM D445 |
Viscosity, Crank (-40℃), mPa | 12000 | ISO 9262 |
Viscosity Index | 168 | ASTM D2270 |
Pour Point, ℃ | -48 | ASTM D97 |
Flash Point (COC), ℃ | 220 | ASTM D92 |
Health, Safety & Environment
The product is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Storage
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed to direct sunlight or freezing conditions.
The indicated properties are typical of those obtained with normal production tolerance and do not constitute a specification. All the information contained in this document is considered accurate as of date of printing, and no warranty or representation, expressed or implied is made as to the accuracy of the data and information in this publication. The information contained herein is subject to change without notice.